OSH Park
Profile for whitenoise
Shared projects
RC Charging Board V2.0
by
whitenoise.
2
layer board of
1.36x1.43
inches
(34.44x36.25
mm).
Shared on
August 4th, 2016 14:44.
iLap LED Extension V1.0
by
whitenoise.
2
layer board of
0.26x0.30
inches
(6.50x7.65
mm).
Shared on
June 20th, 2016 02:09.
For the iLap transponders. The idea is that this gives you more freedom to mount the IR LED while tucking away the main unit inside the body of your aircraft or ground vehicle. This protects the costly main unit from ejections or impact in crashes.
This PCB is mainly to provide a firm, flat surface for adhesives. This can easily be done by soldering the LED to wires.
Helical Antenna Module
by
whitenoise.
2
layer board of
2.01x2.01
inches
(50.98x50.95
mm).
Shared on
March 12th, 2016 00:09.
Antenna Module
by
whitenoise.
2
layer board of
1.75x1.75
inches
(44.35x44.37
mm).
Shared on
March 12th, 2016 00:09.
RC XT Charging & Balance Board
by
whitenoise.
2
layer board of
1.93x1.70
inches
(49.07x43.18
mm).
Shared on
October 9th, 2015 02:44.
RC XT Charging and Balance Board BOM Parts list for one (1) PCB
Note: There are two different versions of XH headers: one with a tab and one without. The one listed below is the one without the tab. The tabbed one will not fit. The crimp allows for 22AWG wire to be used as the smallest size. There is another version that will fit 26AWG Wire as a minimum. My version uses 22AWG wire but smaller wire will also work. XT connectors need to be trimmed so they bottom does not stick out too far past the board.
7x JST-XH Connector Crimp: SXH-001T-P0.6 http://www.digikey.com/product-detail/en/SXH-001T-P0.6/455-1135-1-ND/527370
1x JST-XH 7 Position Female Connector Housing: XHP-7 http://www.digikey.com/product-search/en?mpart=XHP-7&vendor=455
1x JST-XH 3 Position Male Header: B3B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B3B-XH-A%28LF%29%28SN%29&vendor=455
1x JST-XH 4 Position Male Header: B4B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B4B-XH-A%28LF%29%28SN%29&vendor=455
1x JST-XH 5 Position Male Header: B5B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B5B-XH-A%28LF%29%28SN%29&vendor=455
1x JST-XH 6 Position Male Header: B6B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B6B-XH-A%28LF%29%28SN%29&vendor=455
1x JST-XH 7 Position Male Header: B7B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B7B-XH-AM%28LF%29%28SN%29&vendor=455
1x Barrel Connector 2.1mm Male: PJ-037AH http://www.digikey.com/product-detail/en/PJ-037AH/CP-037AH-ND/1644547
1x Amass XT30 Male
1x Amass XT60 Male
1x Amass XT90 Male
1x Pair of Banana Plugs http://www.amazon.com/gp/product/B007QUYQSY?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Recommended wire: 16AWG or 14AWG for main power and 22AWG or 24AWG for balance lead.