MAV-NUS / AVDC-NUS BreakOut Adapter

by borti4938.
Top
Bottom

2 layer board of 0.36x0.53 inches (9.12x13.36 mm).
Shared on April 23rd, 2017 17:54.

More information about the project on GitHub

A small adapter for the N64 RGB mod. - use the service with 0.8mm substrate thickness - preparation: make sure that there are no shorts between adjacent pads on the MAV-NUS-side of the PCB due to the manufacturing process - installation: hold the PCB to the MAV-NUS / AVDC-NUS (pin 1 to pin 13), solder and fix (e.g. with hot glue) the PCB in place.

If you intend to buy the RGB modding board from viletim and you have a MAV-NUS or AVDC-NUS inside your N64, I suggest you to buy the flex cable there, too, as the istallation should be easier with the flex cable, though.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project