OSH Park
BNO055+BMP280BreakoutBoard.v02
- You need to sign in or sign up before continuing.
BNO055+BMP280BreakoutBoard.v02
by PeskyProducts.
2
layer board of
0.71x0.51
inches
(17.91x12.83
mm).
Shared on
April 5th, 2015 03:55.
Bosch’s new BNO-055 9-axis motion sensor plus BMP280 pressure sensor. The BNO-055 has an embedded Cortex M0 ARM processor as well as accel/gyro and mag for a purely hardware absolute orientation solution. This is either a mini Teensy 3.1 shield or a conventional breakout board, choice is made via solder pads on back which bring 3V3 and GND out to edge pins. Sensor can be accessed either via I2C, UART, or HID-I2C on Windows 8 by changing solder pads PS0 and PS1 on back. Lastly, BNO-055 I2C address LSB can be changed via solder pad ADO so two can be on the same circuit, if desired.