OSH Park
afromini quad brushed esc
- You need to sign in or sign up before continuing.
afromini quad brushed esc
by
KoekieMonster.
2
layer board of
0.60x0.31
inches
(15.27x7.95
mm).
Shared on
January 7th, 2015 18:27.
afromini quad quadcopter brushed esc ONLY WORKS WITH REV 0 or REV 1. NOT WITH REV 3. if you need this for revision 3 please send a PM to KoekieMonster @ rcgroups.com, then I’ll draw it.
Bottom: 4x 1206 10k resistor (or 4k7, 2k2 will probably work as well)
Top: 4x FET SOT-23 (I’ve used these: http://www.reichelt.nl/Transistors-IRL-IRFZ-/IRLML-6244/3//index.html?ACTION=3&GROUPID=2896&ARTICLE=132145&OFFSET=16&)
For it to work you need to solder male headers on this board and the afromini and connect the 2. the lipo can be soldered to the + / - pads on the left. connect the + of every motor to the+ of the lipo and the - of every motor to the right FET output (see board layout text)