4x BTN7960/BTN8962 v1b dual H-bridge

by Heisenbug.
Top
Bottom

2 layer board of 4.61x2.20 inches (117.14x55.88 mm).
Shared on May 2nd, 2015 22:16.

Untested/Revised; caps moved closer to ICs. Same size, same schematic.

Bill of Materials

| Qty | Value  | Name (if not generic)  |
-----------------------------------------
|  4  | 2K4ohm | (1/4W 5% ok)           |
|  8  | 1Kohm  | (1/4W 5% ok)           |
|  4  | 10Kohm | (1/4W 5% ok)           |
|  4  | 10uF   | (35V Electrolytic ok)  |
|  4  | 220+uF | (50V Electrolytic ok)  |
|  1  | Header | 20/26pin shrouded Square
|  4  | 1N5408 | (3+Amp Rectifier 40+V ok)
|  4  | BTN7960| (Obsolete, BTN8962 ok) |
|  4  | Header | (5-pin/shrouded, keyed good) 
|  1  | Solderable Terminal Strip 6pos/0.3" Rated 10+Amp

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project