Gen7 Board-ARM v2.0 reprap

by WarHawk-AVG.
Top
Bottom

2 layer board of 4.35x3.56 inches (110.52x90.53 mm).
Shared on June 16th, 2016 05:58.

Gen7 Board-ARM v2.0

A well documented DIY ARM based reprap 3D printer controller board

gen7_2.0_features

  • LPC1114FN28 MCU, a 32-bit ARM CortexM0+.
  • Onboard USB-serial adapter, implemented with an MCP2200.
  • Support for up to 4 stepper drivers in the “Pololu format”.
  • Support for extruder and heated bed.
  • Support for two SPI devices (e.g. SD card and display).
  • Support for always-on fans (5, 7 or 12 volts).
  • No power supply wiring neccessary, just plug an unmodified ATX supply in and be ready.
  • Software power on/off.
  • Oversized high current tracks and MOSFETs for reliable, cool operations.
  • Board size 110 x 90 mm.

2 layer board of 4.35x3.56 inches (111x91mm). $77.50 for three.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project