OSH Park
Shared projects
TEENSY_CAN
by
jpiat.
2
layer board of
0.80x1.86
inches
(20.37x47.24
mm).
Shared on
February 16th, 2016 18:55.
Teensy CAN shield for 3.x based on SN65HVD232 and AMS1117.
Telemetry Inverter - 1 Channel
by
pfriedel.
2
layer board of
0.47x0.36
inches
(12.01x9.02
mm).
Shared on
February 16th, 2016 15:52.
Converts your standard UART output to something FrSky receivers will use.
3x2 Motor Controller MegaShield, v0.2
by
RobertLRead.
2
layer board of
4.01x2.11
inches
(101.80x53.54
mm).
Shared on
February 16th, 2016 15:43.
Ard. MegaShield for 3x2 motor controllers, using Pololu carrier board, with BlueTooth.
This has now been tested. I don’t claim the board is beautifully designed, but it worked without a flaw apparently. I need to document it more fully outside this description here: https://github.com/PIFAH/gluss.
The basic board let’s you solder in 3 Pololu dual-channel 1-amp motor drivers and 1 Sparkfun Blue SMIRF Bluetooth carrier board to produce a Bluetooth controllable 6-channel shield.
Note that it draws power from Vin, which is apparently only rated for 1 amp, so there is a danger of drawing too much power. Putting separate power jack on the board would fix that—perhaps in V0.3 I will do that.
I am specifically using the Firgelli linear actuators here, not motors connected to wheels, and I have 6 headers wired for that. However, someone could ignore those headers or change the desire if they want a different physical mating.
MX3AClone.v06
by
PeskyProducts.
4
layer board of
0.40x0.40
inches
(10.16x10.16
mm).
Shared on
February 16th, 2016 05:17.
Replaced Ta capacitor with 1206 ceramic capacitor to prevent brownout when driving high-current motors. Thickened power traces to 16 mils.
POE RX Board
by
ronp5683.
2
layer board of
0.93x1.60
inches
(23.49x40.64
mm).
Shared on
February 16th, 2016 01:58.
POE RX Board