OSH Park
Shared projects
- You need to sign in or sign up before continuing.
VeloKey_OTS
by
wyojustin.
2
layer board of
5.43x2.15
inches
(137.92x54.74
mm).
Shared on
February 5th, 2016 14:35.
A keyboard for your bike
Baofeng UV5R TRRS Thru-Hole Adapter - WarHawk's Tweak
by
WarHawk-AVG.
2
layer board of
1.93x0.36
inches
(49.02x9.12
mm).
Shared on
February 5th, 2016 13:53.
Baofeng UV5R TRRS Thru-Hole Adapter - WarHawk’s Tweak
2 layer board of 1.93x0.36 inches (49x9mm). $3.45 for three.
Thru-Hole adaptation of johnboiles KK6GIP - Baofeng UV5R TRRS Adapter
Converted to standard size .25 watt resistors, small tantalum caps will work fine, and made the wires between the pads and holes much thicker, along with a few small cosmetic tweaks.
The World's Tiniest RGB LED Cube
by
hwiguna.
2
layer board of
1.00x1.02
inches
(25.43x25.93
mm).
Shared on
February 5th, 2016 12:48.
The World’s Tiniest RGB LED Cube. Please beware that the header holes are a bit too small, so I used wires for headers. More info at my Hackaday.io page.
Baofeng UV5R TRRS Adapter - WarHawk's Tweak
by
WarHawk-AVG.
2
layer board of
1.08x0.32
inches
(27.36x8.15
mm).
Shared on
February 5th, 2016 12:43.
Baofeng UV5R TRRS Adapter - WarHawk’s Tweak
2 layer board of 1.08x0.32 inches (27x8mm). $1.70 for three.
Adaptation of johnboiles KK6GIP - Baofeng UV5R TRRS Adapter
I made the pads 0805, to make it a bit easier to hand solder with an iron (it’s NOT easy with 0603 components…ask me how I know), and made the wires between the pads and holes much thicker, along with a few small cosmetic tweaks
[untested] Stepper Signal Breakout Board
by
Overtuner1.
2
layer board of
0.80x0.57
inches
(20.32x14.55
mm).
Shared on
February 5th, 2016 07:29.
small breakout board for using MCU pins on unused stepper sockets - especially when using more than one analog sensors on RADDS, more endstops than available onboard, fan or heater pwm outputs, whatever…
also connects the signals and power to the outputs - same way as the RRD Silencioso Adapter does.
fits RAMPS, RADDS and other controllers with sockets for standard A4988 and pin-compatible drivers
you should use a 3x3 right angle pinheader