OSH Park
Shared projects
- You need to sign in or sign up before continuing.
SMD Test Board
by
PeteJM.
2
layer board of
1.21x0.98
inches
(30.63x24.94
mm).
Shared on
February 4th, 2016 03:54.
A Test SMD Board
Alice3v1
by
BradGrantham.
2
layer board of
2.96x4.51
inches
(75.08x114.45
mm).
Shared on
February 4th, 2016 03:46.
Alice 3 is a through-hole SBC featuring Z80, Propeller, and ARM Cortex 4F (STM32F4).
- The Z80 runs CP/M 2.2
- The Propeller handles VGA, and 3 pins are brought out to a 5-pin header including GND and 3.3V
- The ARM handles SD Card, PS/2 keyboard, and serial console.
We used this board as an opportunity to learn Propeller, ARM Cortex M series, and KiCAD Schematic Capture and PCB layout.
Firmware for the ARM and Propeller and the Z80 bootloader and CP/M BIOS are checked into Github.
TLC5940 PWM Driver With Regulator
by
KeithM.
2
layer board of
1.29x1.90
inches
(32.69x48.26
mm).
Shared on
February 4th, 2016 03:35.
Multilink Universal Breakout
by
jakej.
2
layer board of
0.70x0.30
inches
(17.78x7.62
mm).
Shared on
February 4th, 2016 01:45.
Breakout for SWD cable on PE Micro Multilink Universal, using connector 20021121-00010C4LF from https://www.digikey.com/product-detail/en/20021121-00010C4LF/609-3695-1-ND/2209147
Si1133 Optical Sensor
by
K8VFO.
2
layer board of
0.76x0.61
inches
(19.20x15.39
mm).
Shared on
February 4th, 2016 01:31.
Si1133 Optical Sensor for use on High Altitude Balloon. Schematic in gerber zip file.