OSH Park
Shared projects
Atmega328P Module, DIP28-Sized, Breadboard Style
by
pugbutt.
2
layer board of
1.40x0.70
inches
(35.59x17.78
mm).
Shared on
November 22nd, 2015 16:27.
Same schematic as before, but ISP connector mirrored so it can come out the silkscreen side of the module, while the other pins come out on the component side. Also, added a reset switch. (Digikey part number EG4918CT-ND.)
The discrete components are 0603.
The crystal is an NDK brand, type NX3225GA.
I’m using a 10MHz one so the board can be powered directly from a lipo cell, but 20M and 16M are available in this package.
Questions or comments to c a iannello at g mail dawt kom
Flow Sensor
by
amcdawes.
2
layer board of
1.53x1.54
inches
(38.94x39.17
mm).
Shared on
November 22nd, 2015 13:50.
Chris and Grayson
Light Sensor 2.0
by
kdub.
2
layer board of
1.69x1.10
inches
(42.88x27.94
mm).
Shared on
November 22nd, 2015 12:47.
A light sensor (second version)
KiloDuino
by
matix24.
2
layer board of
2.10x2.55
inches
(53.37x64.82
mm).
Shared on
November 22nd, 2015 09:46.
atmega1284 dev board
3D Printer Wifi Aux Board
by
BrianEstrada.
2
layer board of
0.92x1.57
inches
(23.27x39.80
mm).
Shared on
November 21st, 2015 23:55.
Untested 1.0 Rev
Add WiFi capability to your 3D printing using one of the AUX ports, I’m currently going to test this using a Rambo Mini, I left the header routed and added jump points instead so you can use it on whatever board you’d like, it’s not ideal but there are so many different AUX configuration that theres not really a one size fits all type of board.
Parts
| Part Name | Quantity | Cost |
|---|---|---|
| ESP-12F | 1 | $2.50 |
| AMS1117-3.3v | 1 | $0.10 |
| 10uF Tantalum 1206 | 1 | $0.06 |
| 22uF Tantalum 1206 | 1 | $0.06 |
| 10k Resistor SMD 805 | 4 | $0.04 |
| 6mm Tactile Switch | 2 | $0.16 |
| 5x2 Female Connector | 1 | $0.01 |
| Osh Park Board | 1 | $2.33 |
| Total | $5.26 |