OSH Park
Shared projects
Dual 16mm Alpha pot wiring board
by
mangros.
2
layer board of
0.70x0.55
inches
(17.78x13.97
mm).
Shared on
September 2nd, 2015 15:36.
16mm Alpha pot board
by
mangros.
2
layer board of
0.55x0.45
inches
(13.97x11.46
mm).
Shared on
September 2nd, 2015 14:29.
Wiring adaptor for 16mm Alpha pots. Works well with right-angle 0.100" Molex KK pin headers. Few bonus features: - Pads for SMD resistors (for bending the taper of the pot) - Two holes on each pin when multiple wires are needed - Extra tracks on the outside for neat mounting of series resistors or capacitors
Zev-1 Seven Digit Nixie Clock - Z570M Series
by
MitchSF.
2
layer board of
0.75x0.91
inches
(19.15x23.16
mm).
Shared on
September 2nd, 2015 13:28.
Seven required for each clock.
This board also work for the IN-8-2. Check lead placement.
Zev-1 Seven Digit Nixie Clock - IN-14
by
MitchSF.
2
layer board of
0.75x0.91
inches
(19.15x23.16
mm).
Shared on
September 2nd, 2015 13:28.
Seven required for each clock.
Teensy 3.1 Breakout Board R2
by
CPT.
2
layer board of
2.39x0.69
inches
(60.81x17.63
mm).
Shared on
September 2nd, 2015 00:34.
Link to the Teensy 3.2 compatible version
Breadboard compatible breakout board for Teensy 3.1 from pjrc.
Parts used
- male pin header with long pins: ~6.2mm pin length on both sides, total height 15mm Aliexpress
- optional: Tactile switch for reset
- Surface Mount: ALPS SKQGADE010 (Mouser Part #: 688-SKQGAD)
- Through Hole 6x6x5MM: ALPS SKHHAMA010 (Mouser Part #: 688-SKHHAM)
- optional: VUSB to VIN diode
- Schottky diode SOD-123: Diodes Incorporated B130LAW-7-F (Mouser Part #: 621-B130LAW-F)
- optional: RTC Crystal
- 32.768 kHz 12.5 pF: Citizen Finetech Miyota CFS206-32.768KDZF-UB (Mouser Part #: 695-CFS206-327KF-U)
- (+ Teensy 3.1)
Pinmap & Dimensions
