OSH Park
Shared projects
New Mighty 1284P WiFi, A 40-pin DIP module
by
Firebirduino.
2
layer board of
2.27x0.71
inches
(57.71x17.96
mm).
Shared on
June 3rd, 2015 15:40.
The low cost and easy to make Mighty1284P WiFi DIP Module for breadboard prototyping. Made with all through hole components. Use the new core and exact same pinout of the original maniacbug Mighty 1284P 16MHz prototype board. Other features include the ESP8266 connector, reverse polarity protection diode, reset button, and D13 LED indicator. See details at: http://www.firebirduino.com/mighty_stick/
4 x Tri > 4 x Sine
by
mangros.
2
layer board of
3.94x1.90
inches
(100.00x48.26
mm).
Shared on
June 3rd, 2015 11:56.
MicroFluidicsController1.0
by
StreyLabs.
2
layer board of
2.70x2.10
inches
(68.58x53.37
mm).
Shared on
June 3rd, 2015 10:54.
Pressure & Valve Controller Arduino Shield
So Excited It Megahertz
by
NBrummer.
2
layer board of
2.00x1.00
inches
(50.80x25.43
mm).
Shared on
June 3rd, 2015 03:11.
53.125 MHz 3rd Overtone VXO
Xbee - Simple 2 Sensor
by
BenjaminG.
2
layer board of
1.01x1.26
inches
(25.60x31.98
mm).
Shared on
June 2nd, 2015 23:02.
XBee Board.
Includes 2.54mm screw terminals for two sensors.
1. One is active low, using the xbee pullups. This is a two wire hook-up, simple switch (DIO and ground).
2. One is powered and assumed active high, with internal sensor pulldowns. This is three wire hook-up (DIO, positive, ground).
3. Micro USB connector to provide power only.
4. LEDs for power and RSSI.
5. Works great.
6. Use one on my mailbox under battery power with one reed switch.
7. Leave the power LED unpopulated for better battery life.