OSH Park
Shared projects
LNA-Skyworks-67015
by
machinaut.
2
layer board of
1.00x1.00
inches
(25.43x25.43
mm).
Shared on
February 11th, 2015 07:13.
https://github.com/hpux735/Skyworks-LNA-designs (6524b53)
Genesis microcontroller
by
Baixiao.
2
layer board of
3.54x0.95
inches
(89.87x24.13
mm).
Shared on
February 11th, 2015 02:47.
Arduino Compatible micro-controller using Atmega 328. You can load your code through Arduino IDE. This controller is smaller but as powerful as Arduno uno. Checkout my EAGLE file: https://github.com/baixiaobest/Project-Genesis
ATmega328 LED Debugger
by
Lungless.
2
layer board of
2.00x2.86
inches
(50.75x72.72
mm).
Shared on
February 11th, 2015 01:08.
On-board ATmega328 with ISP header and all PORT pins broken out to individual LEDs and headers. Additionally, there is an over-voltage and over-current protection circuit with an indicator LED.
USB Module 6pin FTDI v3 2-part
by
Heisenbug.
2
layer board of
3.60x0.69
inches
(91.31x17.50
mm).
Shared on
February 10th, 2015 22:21.
$12.35/set of 3. Untested, but will update this.
2 pieces break-apart and stack to form the dense, versatile FTDI module for the Modul-Ar-duino.
Designed in pieces to make repair easier/quicker for those who may occasionally fry things, e.g. inexperienced students. Just unsolder the headers and solder on a new FT232RL carrier board. That way you’re back up and running quicker; replacing the dead chip can be done later.
Additionally versatile; can be populated with your choice of USB connectors- type B, A-mini with SMD or pT/H anchor tabs. Has DTR cap onboard for auto-reset of arduino, and optional shorting jumper for it, as well as DTR/RTS and 3v3/5V selection jumpers.
Also can be populated with your choice of male/female 6pin headers, top or bottom, 1x6 or 2x6 (use for greater height offsets) in either pin-thru-hole (pT/H) or surface mount (SMD) style - though you may want to scratch off the solder mask between the pairs of holes for the 2x6 connector to use SMD.
mainboard.brd (99cf0f7)
by
machinaut.
4
layer board of
3.55x3.78
inches
(90.20x95.91
mm).
Shared on
February 10th, 2015 21:45.
https://github.com/kicksat/avionics