OSH Park
Shared projects
StdBx USB
by
uChip.
2
layer board of
0.45x0.50
inches
(11.46x12.73
mm).
Shared on
January 7th, 2015 02:20.
USB connector interface board
Photodiode connected to LogAmp AD8304
by
Dxtn.
2
layer board of
1.25x0.94
inches
(31.75x23.83
mm).
Shared on
January 7th, 2015 00:58.
Optical Power meter with logarithmic output. Optical power meter in dBm.
ESP8266 Programmer
by
nochkin.
2
layer board of
0.59x0.95
inches
(14.91x24.13
mm).
Shared on
January 6th, 2015 21:07.
http://www.esp8266.com/wiki/doku.php?id=setup-windows-compiler-esp8266
LEDAnd5vSupplyWithSwitchesAndAvr
by
dr2chase.
2
layer board of
3.91x3.15
inches
(99.34x80.01
mm).
Shared on
January 6th, 2015 20:46.
Bicycle hub power distribution – some to LEDs, some to USB, includes microcontroller and switches for directing LED current.
BNO055+MS5637BreakoutBoard.v01z
by
PeskyProducts.
2
layer board of
0.71x0.51
inches
(17.91x12.83
mm).
Shared on
January 6th, 2015 08:37.
Bosch’s new BNO-055 9-axis motion sensor plus MS5637 pressure sensor. The BNO-055 has an embedded Cortex M0 ARM processor as well as accel/gyro and mag for a purely hardware absolute orientation solution. This is either a mini Teensy 3.1 shield or a conventional breakout board, choice is made via solder pads on back which bring 3V3 and GND out to edge pins. Sensor can be accessed either via I2C, UART, or HID-I2C on Windows 8 by changing solder pads PS0 and PS1 on back. Lastly, BNO-055 I2C address LSB can be changed via solder pad ADO so two can be on the same circuit, if desired. Added boot pin breakout.