OSH Park
Shared projects
[outdated?] 22mm A22-7135 (22mm 7135) v021
by
Red.
2
layer board of
0.88x0.88
inches
(22.28x22.28
mm).
Shared on
November 22nd, 2014 21:50.
Replacement? - https://oshpark.com/shared_projects/CUshrRzj
0805 sized resistors & caps.
Requires that the positions marked 7135-A and 7135-B have at least one 7135 populated each. Requires that the 7135 next to R2 be populated for the voltage divider to work (eg LVP).
Single-cell component list:
- R1 - 22k 1% resistor
- R2 - 4.7k 1% resistor
- C1 - 5uF/10uF/whatever capacitor
- OTC - 1uF capacitor
- D1 - low Vf diode for polarity protection
Zener components:
- R1 - appropriate 1% resistor
- R2 - 4.7k 1% resistor
- C1 - 5uF/10uF/whatever capacitor
- OTC - 1uF capacitor
- R3 - appropriate 0805 resistor, such as 200 ohm
- Zener - appropriate SOD-123 zener, such as 4.3v
9 LED Board
by
schizobovine.
2
layer board of
0.79x0.79
inches
(20.02x20.02
mm).
Shared on
November 22nd, 2014 20:41.
For 5mm PTH LEDs, split into two circuits (5 for the white channel, 4 for the red channel).
FV-1 SKRM riser dev board
by
Ice-9.
2
layer board of
2.74x1.76
inches
(69.70x44.75
mm).
Shared on
November 22nd, 2014 20:25.
FV-1 SKRM riser dev board
microfluids test
by
2
layer board of
1.00x0.30
inches
(25.43x7.62
mm).
Shared on
November 22nd, 2014 17:24.
ohhh meh gehhh
Small Board Xtal
by
LA3PNA.
2
layer board of
2.00x2.00
inches
(50.80x50.80
mm).
Shared on
November 22nd, 2014 17:24.
VNA measurment of crystals