OSH Park
Shared projects
- You need to sign in or sign up before continuing.
TeensyNet V14.0
by
jimmayhugh.
2
layer board of
3.94x3.15
inches
(100.00x80.01
mm).
Shared on
October 18th, 2014 14:58.
A 1-Wire Controller Board
MPU9250+MS5637TeensyMicroAddOn.v04x
by
PeskyProducts.
2
layer board of
0.61x0.30
inches
(15.39x7.62
mm).
Shared on
October 18th, 2014 04:49.
MPU9250 9-axis motion sensor + MS5637 Altimeter for mounting on the back pads of Teensy 3.1. Removed back plane ground beneath MPU9250 to reduce magnetometer interference.
SG3525 Breakout V1
by
Neon_Bulb_Dude.
2
layer board of
2.59x1.23
inches
(65.74x31.12
mm).
Shared on
October 18th, 2014 03:26.
PWM controller for…anything. MOSFET pads not included. This circuit can be used for driving a flyback transformer or making electronic noises. Connect the labeled outputs to a pair of MOSFETS if you want to drive a flyback or connect one of the outputs directly to an amplified speaker if you want to make noises.
555 Pocket Theremin
by
Neon_Bulb_Dude.
2
layer board of
2.59x1.25
inches
(65.74x31.75
mm).
Shared on
October 18th, 2014 03:16.
This is the first version of a board based on a “Pocket Theremin” published in a Popular Science article. I’ve tested the board and it is functional. You will need to attach two variable resistors in the indicated locations. The variable resistors can be anything–playdough, photoresistors, saltwater, conventional variable resistors, etc. May want to use larger capacitors than the indicated 0.01uF–I went as high as 0.4uF. Bigger capacitors=lower frequency. Be creative!
Fan Controller
by
KOMIgenie.
2
layer board of
1.52x0.65
inches
(38.58x16.56
mm).
Shared on
October 17th, 2014 21:56.