OSH Park
Shared projects
- You need to sign in or sign up before continuing.
LASER SYNC
by
Griffin.
4
layer board of
2.46x1.66
inches
(62.38x42.06
mm).
Shared on
April 6th, 2014 21:24.
Syncronizes a 50MHz laser and an 80MHz laser.
ControllerBlocks 4 x 4 cm proto
by
Xonik-Devices.
2
layer board of
1.58x1.58
inches
(40.00x40.00
mm).
Shared on
April 6th, 2014 19:55.
Single item prototype board
LED Breadboard Stick
by
ccombs.
2
layer board of
0.28x0.50
inches
(7.16x12.70
mm).
Shared on
April 6th, 2014 18:19.
Add a 330uf resistor, an LED of your choosing (3mm-10mm), and a 2-pin header for an easy-to-move breadboard LED stick! Helpful for diagnosing low-speed logic, or making pretty patterns. Note: Solder the short pin of the LED towards the flat side of the outline on the board. (For other voltages or unusual LED colors, try this resistor calculator: http://led.linear1.org/1led.wiz )
DKBLE11x OTA AddOn Module
by
drmkroll.
2
layer board of
1.05x0.90
inches
(26.64x22.86
mm).
Shared on
April 6th, 2014 11:26.
This is the DKBLE112/113 OTA AddOn Module described in blogpost: http://www.mkroll.mobi/?p=1501
The bill of materials consists of a few parts only:
- 2 x 10 kOhm resistor (0603) package
- 1 x 1uF capacitor (0603) package
- 1 x W25X20CL SPI flash
- 2 x 8pin Arduino Headers.
The Eagle source files and the part numbers to order are available from the github repository at: https://github.com/michaelkroll/Hardware-Tools
PICcell
by
bloguetronica.
2
layer board of
0.70x1.00
inches
(17.78x25.43
mm).
Shared on
April 6th, 2014 10:34.
PIC12F683 development board