OSH Park
Shared projects
NES Toploader Composite Mod V0.1A
by
SwampFox56.
2
layer board of
0.69x0.88
inches
(17.48x22.40
mm).
Shared on
August 27th, 2016 00:19.
Been sicker than hell, so I made something simple.
This is the Composite Video Mod for the NES-101 (aka Toploader). Pad marked “PPU” gets soldered to pin 21 of the RP2C02 (PPU). Pin must be lifted from the board.
Also, there is no ground. Instead, a ground connection is achieved when you screw the board to the RF shielding. This is a test version of the board. Feel free to try.
DragonflyGPSAddOn.v01b
by
PeskyProducts.
4
layer board of
1.01x1.41
inches
(25.55x35.71
mm).
Shared on
August 26th, 2016 22:36.
Added backup battery and nRF52 for BLE data broadcast.
PD68 Illuminated Switch - 16mm Rev5.3 - Bottom
by
pilotdog68.
2
layer board of
0.63x0.63
inches
(15.93x15.93
mm).
Shared on
August 26th, 2016 20:54.
PD68 Illuminated Switch - 16mm Rev5.3 - Top
by
pilotdog68.
2
layer board of
0.66x0.66
inches
(16.76x16.76
mm).
Shared on
August 26th, 2016 20:54.
esp-ws2812-partycat-v2
by
lukecyca.
2
layer board of
2.68x1.19
inches
(68.12x30.12
mm).
Shared on
August 26th, 2016 20:22.