OSH Park
Shared projects
AudioLED V1
by
InTentss.
2
layer board of
1.68x1.55
inches
(42.55x39.37
mm).
Shared on
May 7th, 2016 08:00.
AudioLED V1: Arduino Pro-Mini (Atmega328p) With auto-biased sound (MAX9814) with Equalizer Chip (MSGEQ7)Will to drive a string of WS2801 / WS281x LEDs. Perfect for sound reactive strings of LEDs.
Monome Switch 1U
by
infovore.
2
layer board of
2.36x1.03
inches
(60.02x26.16
mm).
Shared on
May 6th, 2016 15:34.
A 1U-compatible PCB for the Monome “Switch” module. At 60mm wide, this is effectively 12HP wide; height is compatible with the Erthenvar/PulpLogic 1U format.
This has not been manufactured or tested by this creator, but as a simple re-jig of the layout, it should be correct.
Tek 8x8
by
Danjovic.
2
layer board of
4.08x2.35
inches
(103.58x59.74
mm).
Shared on
May 6th, 2016 14:50.
PS/2 to 8x8 Matrix Keyboard adapter, expansible
DE-1 MSX Add On
by
Danjovic.
2
layer board of
3.34x2.30
inches
(84.79x58.42
mm).
Shared on
May 6th, 2016 14:47.
DE-1 Addon for MSX controllers and PSG Audio
One relay and Power Supply
by
BrK.
2
layer board of
1.10x1.40
inches
(27.94x35.59
mm).
Shared on
May 6th, 2016 14:08.
Power supply and one relay for my esp-07 board.
With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have any questions, contact me on georgian.borca@yahoo.com
https://oshpark.com/shared_projects/TuTVsmvi