OSH Park
Shared projects
fpga_castellated_vias_16.zip
by
BlackMesaLabs.
2
layer board of
0.96x0.71
inches
(24.43x18.08
mm).
Shared on
May 5th, 2016 17:45.
Micro MinimOSD PDB
by
pfriedel.
2
layer board of
1.42x1.42
inches
(36.02x36.02
mm).
Shared on
May 5th, 2016 16:38.
Note: No clearance on standoffs is an almost guaranteed short circuit with metal standoffs. And the minim cutout is undersized. And why not have a 12v reg, since there’s space. Anyway, don’t use.
I like an OSD, but I hate wiring it. Put the Pololu reg on top or beneath the board. Fundamentally just a respin of the Atom PCB, but with bigger tracks for the power leads because the Atom PCB doesn’t look like it’d stand up to a constant 5A per motor load.
The pads are mostly laid out to be as directly wired for a SN20a as possible, but the pads for motor #1 are reversed to provide better current handling for the negative rail.
There are ground and signal “pads” near the power pads for jumping from the ESC to a second wire for running up to the FC.
Warning: Untested. Order at your own risk.
ELongboard Capacitor Board 0.1
by
DougM.
2
layer board of
1.00x2.30
inches
(25.43x58.45
mm).
Shared on
May 5th, 2016 15:49.
SM Voltage Regulator
by
acraddoc91.
2
layer board of
1.55x1.30
inches
(39.37x33.02
mm).
Shared on
May 5th, 2016 15:48.
NonSMVoltageRegulator
by
acraddoc91.
2
layer board of
1.55x1.45
inches
(39.37x36.83
mm).
Shared on
May 5th, 2016 15:48.