PLEN Playground - Forum

<p>The surface of the dip film should not have dried flowers Opaque white dots, wet mist, stains, scratches and indentation, the surrounding tongue and mortise should be kept intact. Composite board length, width Bespoke Non Slip Tape Wood Deck and thickness should be the same as the product description, can be arbitrarily taken more than a composite floor after splice observation to see whether the combination of stitching joints rugged feeling, patchwork to be arbitrary and then take more than one floor Constructed to observe its own tenon, groove is tight, feel is smooth. </p> <p>The middle layer of parquet, not only can increase the foot feeling, but also to prevent the expansion of the floor deformation, the thickness of 7-10mm is appropriate. In the material selection, the middle layer of rubber wood, pine quality best garden decor UAE higher grades, followed by multi-layer willow wood multilayer plywood as the substrate, multi-surface decorative panels laminated with hardwood sheets, the thickness is usually 0.2-0.8mm between. 8 the middle layer of parquet, not only can increase the foot feel, but also to prevent the expansion of the floor deformation, the thickness of 7-10mm is appropriate.</p> <p> In the selection, the middle layer of rubber wood, pine quality higher grades, followed by willow. Multi-layer parquet often multi-layer plywood as the substrate, multi-surface decorative panels laminated withhow to make a wood slat bench Bengal  hardwood laminates, the thickness is usually between 0.2-0.8mm. Consider the size of the room area. Under normal circumstances, if the room is large and adequate lighting, it is appropriate to use darker color, texture, thick wood flooring, so that the larger the relative compactness of the room; the opposite, the small area of the room can be used in light colors, fine texture The wooden floor gives a sense of openness sunshade out of composite decking and will make the smaller room appear generous.</p>