Translations of this page:
User Tools
Sidebar
specifications:print_detail:arms
Table of Contents
Arm x2
Overview
| 3D Printer Used | Print Region |
|---|---|
| Afinia H480 | Arm x2 |
| | |
Files that Need to Print
| servo_horn_rev1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 4 | | 0.15 [mm] | Solid | Fine | 4 [min.] | |
| servo_bracket_type1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Solid | Fine | 31 [min.] | |
| servo_bracket_type1_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Solid | Fine | 31 [min.] | |
| servo_assem_type1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 | | 0.15 [mm] | Solid | Fine | 34 [min.] | |
| servo_bracket_elbow_1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 | | 0.15 [mm] | Solid | Fine | 17 [min.] | |
| servo_bracket_elbow_2.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 | | 0.15 [mm] | Solid | Fine | 17 [min.] | |
| hand.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 | | 0.2 [mm] | Loose | Normal | 50 [min.] | |
specifications/print_detail/arms.txt · Last modified: 2015/11/16 03:30 by Guvalif
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
