Translations of this page:
User Tools
Sidebar
specifications:print_detail:legs
Table of Contents
Foot x2
Overview
| 3D Printer Used | Print Region |
|---|---|
| Afinia H480 | Foot x2 |
| | |
Files that Need to Print
| servo_horn_rev1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 10 | | 0.15 [mm] | Solid | Fine | 4 [min.] | |
| servo_bracket_type1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Solid | Fine | 31 [min.] | |
| servo_bracket_type1_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Solid | Fine | 31 [min.] | |
| servo_assem_type2.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 | | 0.15 [mm] | Loose | Fine | 72 [min.] |  |
| servo_assem_type2_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 2 | | 0.15 [mm] | Loose | Fine | 72 [min.] | |
| servo_bracket_knee.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] Support angle 30° | Loose | Normal | 52 [min.] | |
| servo_bracket_knee_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] Support angle 30° | Loose | Normal | 52 [min.] | |
| servo_bracket_shin.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] Support angle 40° | Loose | Fine | 65 [min.] | |
| servo_bracket_shin_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] Support angle 40° | Loose | Fine | 65 [min.] | |
| servo_bracket_ankle_1.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Loose | Normal | 11 [min.] | |
| servo_bracket_ankle_1_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Loose | Normal | 11 [min.] | |
| servo_bracket_ankle_2.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Loose | Normal | 10 [min.] | |
| servo_bracket_ankle_2_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Loose | Normal | 10 [min.] | |
| foot.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.20 [mm] | Loose | Normal | 28 [min.] | |
| foot_mirror.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.20 [mm] | Loose | Normal | 28 [min.] | |
specifications/print_detail/legs.txt · Last modified: 2015/12/04 05:37 by Guvalif
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
