You are not logged in.
- Topics: Active | Unanswered
#1 2017-05-29 19:38:49
- mandreas
- Member
- Registered: 2016-03-13
- Posts: 121
Kld 2150 lcd, machine setup and resin profile
Hi all,
here is my setup for the KLD2150 lcd, it is also valid for the KLD1260, obviously changing some resolution parameters,
you need to install Sprinter FW, and have the advantage of allowing the use of parametrization directly from the nanodlp interface, as by image,
https://www.dropbox.com/s/mxbp602wb4638 … R.rar?dl=0
Last edited by mandreas (2017-05-29 19:39:38)
Offline
#2 2017-05-30 06:10:59
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 2,737
Re: Kld 2150 lcd, machine setup and resin profile
Looks great. Could I share them on https://www.nanodlp.com/repo/ page?
Offline
#3 2017-05-30 16:47:48
- mandreas
- Member
- Registered: 2016-03-13
- Posts: 121
Re: Kld 2150 lcd, machine setup and resin profile
Shahin wrote:
Looks great. Could I share them on https://www.nanodlp.com/repo/ page?
Thanks Shahin 
,
Of course you can put it on the page, it is still in test mode, but so far it has behaved well
Offline
#4 2017-05-30 17:11:03
- mandreas
- Member
- Registered: 2016-03-13
- Posts: 121
Re: Kld 2150 lcd, machine setup and resin profile
Z axis speed parameters, must be adjusted here,
Offline