You are not logged in.
Pages: 1
Add the "Calibrate" button to the "Setup-> Z-Axis control" screen. When you click to copy the value of the parameter "Current Pulse" in "Setup-> Machine Settings-> Z-Axis Height"
Offline
Calibrate indicate automatic measurement and adjustment. We already have it when you are using direct control + end switch.
Offline
My sensor is at the top of the printer. When triggered, the position is set to 0.
The bottom position - the "Current Pulse" parameter - is searched for manually using a sheet of paper between the LCD matrix and the platform.
I would like to have a button that will copy the current pulse to Z-Axis Height
Offline
Done, will be released with next build
Offline
Pages: 1