RASPBERRY IP ADDRESS

georpo · 2018-11-05 07:12:58

Hello,

Is it possible for nanodlp to send the PI's ip address to my custom RAMPS board via USB serial port? (the same port that sends Gcode)

Shahin · 2018-11-07 06:15:02

Yes it is possible to add such feature. But if you do not have plan to release your printer publicly. Try use external call [[ExecReturn python /home/pi/get_ip.py]]

georpo · 2018-11-07 06:20:22

Thanks for the reply.
Actually I never used a PI before. First time is now with nanodlp.
I could use some guidelines about external call [[ExecReturn python /home/pi/get_ip.py]].

Thanks again!

nanoDLP

#1 2018-11-05 07:12:58

RASPBERRY IP ADDRESS

#2 2018-11-07 06:15:02

Re: RASPBERRY IP ADDRESS

#3 2018-11-07 06:20:22

Re: RASPBERRY IP ADDRESS

Board footer