You are not logged in.
Setting up NanoDLP for Wanhao D7, and am trying to follow the "Easy Install" guide.
I used the .img provided, imaged the SD card, dropped it into my Pi3, and connected via Ethernet. Once connected, I went to the web dashboard on my PC, input the credentials for the wifi network. It connects initially, but if I toggle the log, the log is in a repeating pattern "Wifi connection is down" followed by "Connected to SSID", and repeat, ad infinitum. It looks like there is roughly a 2 minute interval to reconnect, and I get the disconnect notice within 10 seconds of it connecting.
I tried upgrading, and am on build 1589 right now. If I disconnect the Ethernet, I have no access to the Pi3.
Has anyone seen this behavior, or have any advice?
Thanks in advance
Last edited by Grim6 (2017-08-14 12:37:58)
Offline
My guess is weak signal or power issue.
Offline
I don't think it's either of those. For setup, I've got the Pi3 sitting just feet away from the router, and other devices near it are getting ~180 Mbps, full bars.
Offline
maybe there is more surround wifi signals interfering on your spot, i placed a usb wifi dongle on rpi3 and solved the problem
Offline
Well, the problem resolved itself somehow. I left it alone over the past week, plugged it in this morning to try figuring out the problem, and it connected no problem... No updates, no changes made.
Offline