You are not logged in.
Hi,
I'm having a problem to calibrate z axis control. Some parameters in resin profiles and in machine settings aren't clear for me in tutorials, for my first print. I tested the configurations posted in repository of official website of nanoDLP and some configurations that I found in this forum, but It didn't work. Z-axis is going down until the LCD. I quickly shutdown the printer to prevent broke the LCD.
If I forgotten any configuration to post here please tell me.
Thanks for any help.
My Configurations
Raspberry Pi 3 Model B
Shield Direct Control
Display 5 inch HDMI 800x480 pixels
UV resin 490nm
My Setup nanoDLP Generic
{
"ID": 1,
"Name": "NanoDLP Generic Printer",
"Lang": "pt-br",
"Email": "",
"Port": 80,
"PrinterType": 0,
"ZAxisPin": 22,
"DirectionPin": 15,
"LimitPin": 0,
"LimitPinB": 0,
"LimitPinMode": 0,
"WaitPin": 0,
"EnablePin": 16,
"EnablePinState": 0,
"EnablePinMode": 0,
"FaultPin": 0,
"FaultPinState": 0,
"ShutterPin": 11,
"ShutterType": 2,
"ShutterMode": 1,
"ShutterOpen": 500,
"ShutterClose": 2500,
"ShutterOpenGcode": "",
"ShutterCloseGcode": "",
"ShutterSignalLength": 1000,
"MaxSpeed": 1000,
"MinSpeed": 500,
"StartupSpeed": 100,
"StopPositionMm": 10,
"ResinDistanceMm": 5,
"ZAxisHeight": 20854,
"MotorDegree": 1.8,
"MicroStep": 16,
"LeadscrewPitch": 5,
"LCDType": 0,
"LCDAdress": 27,
"LCDPath": "/dev/i2c-1",
"ShieldType": 1,
"ShieldEncoding": 0,
"ShieldI2CAddress": 0,
"ShieldUSBAddress": "/dev/ttyACM0",
"ShieldSpeed": 115200,
"ShieldBootup": "",
"ShieldStart": "",
"ShieldResume": "",
"ShieldFinish": "",
"ShieldAxisMode": 0,
"ShieldPositioning": 0,
"ManualMoveGcode": "",
"SyscallStart": "",
"SyscallFinish": "",
"CameraFrequency": 0,
"CameraStore": 0,
"CameraCommand": "-w 1296 -h 972 --timeout 700 --awb sun",
"ShutdownPin": 0,
"ProjectorWidth": 800,
"ProjectorHeight": 480,
"ProjectorType": 4,
"ProjectorPowerCycle": 0,
"ProjectorSpeed": 9600,
"ProjectorAddress": "/dev/ttyUSB0",
"ProjectorOn": "* 0 IR 001",
"ProjectorOff": "* 0 IR 002",
"ProjectorLampQuery": "",
"ProjectorLampEffect": 0,
"ProjectorOnSyscall": "",
"ProjectorOffSyscall": "",
"ProjectorWarmup": 0,
"ImageMirror": 0,
"LightOutputFormula": "",
"BarrelFactor": 0,
"BarrelX": 0,
"BarrelY": 0,
"FBPath": "",
"XYRes": 65,
"YRes": 65,
"Username": "",
"Password": "",
"ViewUsername": "",
"ViewPassword": "",
"OnlineKey": "",
"Mute": 0,
"DisplayID": 0,
"DefaultProfile": 0,
"SpeedFormula": "",
"RemoteSlicer": "",
"Theme": 0,
"CustomValues": null,
"SetupMode": 2,
"WifiType": "",
"WifiPass": "",
"WifiSSID": ""
}
Last edited by pixidu (2019-01-31 12:39:10)
Offline