You are not logged in.
Pages: 1
Hello Shahin,
I am trying to use LCD with 1920 X 1200 resolution and HDMI for image mask on my LCD printer.
I can not get full calibration image of height side (1200) even x/y pixel setting is correct . There are no image (black) about 10mm from top edge of the LCD.
Display of wide side (1920) looks ok.
What is wrong?
Thanks.
Offline
Disable overscan on config.txt file
Offline
Thanks for your reply
I have tried to change overscan values as below but there was nothing to change on the LCD display via changing of overscan.
disable_overscan=0, 1 or delete line
overscan_top= -90 to +90 or delete line
Offline
So put value on overscan also try tweak HDMI settings.
Offline
Pages: 1