nanoDLP

Yep of course I will.
Currently I'm enhancing the Nextion-UI to become able to create new plates from USB-Memory Stick or SD-Card.
Regards, ToS

I'm right in the middle of enhancing functionality. Once I'm done, I plan to fork and publish/ maintain the fork via Github (just also have to figure out how that works).

Yesterday I finished the "Add Plate" functionality:
- on an additional screen a Profile can be selected,...
- one of the available drives (SC-Card, USB-Memory Stick...) can be selected,...
- the files (STL, ZIP...) in the root of the selected drive will be listed and one file can be selected...
- For savety a confirmation page will be shown to approve the action first and then after confirmation...
- the new Plate will be uploaded and sliced and become immediatly available for printing

Also nice feature:
- the TCP/IP address of the printer is now shown in the center of the home screen.
- when the TCP/IP address gets pressed, another screen with the QR-Code of the printers address shows up, so that with the QR-recognition of the smartphone camera, the Web-interface will show up automatically on the smartphone

What comes next:
- add a "remove Plate" feature
- some "beautification" for the new "add Plate" screen
- some more nice icons (for Printing and Deleting of plates)

Thanks, it looks very well, please keep me updated

Amazing, it has everything you need for use as a standalone 3d dlp

Just a short note to those who requested download:

I forwarded my changes to Julien so that new options can be merged into his master-version.
I'm not quite sure if all modifications will be taken over and when it will become availble to public.

Regards Stefan aka ToS

Hello Julien,

I recently purchased a Nextion 2.4 screen and installed Tibus firmware on my Pi 3 following your instruction. When I connected the Pi with touchscreen(SD card inside), the screen only showed blank with red words "bard 9600, SD card update", and won't change anymore. Do you have solutions for this?

Thank you!

Johnny

To install the latest version:
1. Download the latest version with the command $git clone https://github.com/Tibus/TouchScreen-For-NanoDLP.git
2. replace files from the /home/pi/nextion folder with TouchScreen-For-NanoDLP files
3. Install the IP module. To do this, go to the /home/p/nextion folder and run the command $sudo npm install ip
4. To view the current slice when printing: In the file /bin/plugins/nextion/pages/printingHome.js
remove the word "nextion" from the following block:

        case 11:
                _context2.next = 13;
                return this.nextion.getValue("t12.x");

              case 13:
                this.imageX = _context2.sent;
                _context2.next = 16;
                return this.nextion.getValue("t12.y");

              case 16:
                this.imageY = _context2.sent;
                _context2.next = 19;
                return this.nextion.getValue("t12.w");

How did you replace the file, I got permission errors

Thank you for the good work, Julien!

I tried to install V0.3, but ...on the screen again only "connecting to printer.."  After that I downgraded to V0.2. On Nextion 5´´ is the file preview window very small, I can´t see the black-white layer window during printing process, another things, but V0.2 is correct connected to nanodlp, can control, usw..

Thanks anyway

Please retry now, I updated the tar.gz file for V0.3

@juliendelnatte:

I had a look inside the pi2_3.tar.gz of version 0.3 from what I have seen, the package.json that contains all dependencies is not part of it, but instead a huge subfolder node_modules that contain most of the dependencies but not the latest additions:

 "dependencies": {
    "babel-polyfill": "^6.23.0",
    "babel-preset-es2017": "^6.24.1",
    "get-pixels": "^3.3.0",
    "imagemagick": "^0.1.3",
    "png-js": "^0.1.1",
    "pushbullet": "^2.0.0",
    "request-promise-native": "^1.0.4",
    "reqwest": "^2.0.5",
    "serialport": "^4.0.7",
    "sharp": "^0.18.1",
    "three": "^0.86.0",
    "xhr2": "^0.1.4",
    "ip": "^1.1.5",
    "drivelist": "^6.1.5",
    "child_process": "^1.0.2"
  }

...so for example png-js is part of the node_modules folder but not drivelist for example.
Maybe that is the reason for fhe reported issues here?

For those that reported issues: can you try the following:

sudo cd /home/pi/nextion
sudo npm i ip
sudo npm i drivelist
sudo npm i child_process
sudo shutdown -r now

Regards
ToS

If you see buttons after the "connectings" screen, it's that the UART connexion work! I think there is a problem in ID's... Nextion probably change all ID (don't know why) and so the software di not work anyway. Will try to fix this asap and talk about it on Nextion forum