[[StopPosition]] [[CurrentPosition]]

L.Merino · 2018-05-19 21:54:01

Hello, I'm trying to use these two variables to make a formula, but I find that they always have the same value.

[[StopPosition]] 10

[[CurrentPosition]] 0.05

Can I be doing something wrong for this to happen?

I am using the NanoDLP1832 version

Thank you

Shahin · 2018-05-20 02:56:32

You probably do not update position [[SetPosition]] as it required for RAMPS board.

L.Merino · 2018-05-20 14:15:48

Actually, I have done a quiz in which I put [[SetPosition]] to 20, and then I check it with [[CurrentPosition]], and it indicates that it is 0.05

Shahin · 2018-05-21 03:18:18

Which positioning you are using Absolute or Relative?

L.Merino · 2018-05-21 10:18:15

Absolute

Shahin · 2018-05-28 03:38:37

Please, share a debug file.

L.Merino · 2018-05-28 14:43:41

https://app.box.com/s/lhh3o4pzhek5m3xpgxuyrp9hcj31x5u1

Shahin · 2018-05-31 04:33:00

There is a communication issue between pi and ramps, see if baudrate matches on both end and try change cable, you should not receive non english characters from RAMPS.

L.Merino · 2018-05-31 09:23:37

Thanks, perform tests.

nanoDLP

#1 2018-05-19 21:54:01

[[StopPosition]] [[CurrentPosition]]

#2 2018-05-20 02:56:32

Re: [[StopPosition]] [[CurrentPosition]]

#3 2018-05-20 14:15:48

Re: [[StopPosition]] [[CurrentPosition]]

#4 2018-05-21 03:18:18

Re: [[StopPosition]] [[CurrentPosition]]

#5 2018-05-21 10:18:15

Re: [[StopPosition]] [[CurrentPosition]]

#6 2018-05-28 03:38:37

Re: [[StopPosition]] [[CurrentPosition]]

#7 2018-05-28 14:43:41

Re: [[StopPosition]] [[CurrentPosition]]

#8 2018-05-31 04:33:00

Re: [[StopPosition]] [[CurrentPosition]]

#9 2018-05-31 09:23:37

Re: [[StopPosition]] [[CurrentPosition]]

Board footer