it is not possible to insert a new mask

elshad66 · 2018-06-27 19:43:58

HI Shahin

1 edited a new mask
2 check, click Preview
3 click save, wait 1-2 minutes, the old mask is updated with a new final mask
4 open setup > projector mask and see old mask
5 click remove mask. old mask is deleted
6 come back mask generator again click save .and again go setup > projector mask and again see old mask
7 again come back mask generator. save new final mask in folder
8 go setup > projector mask click remove mask. old mask is deleted
9 click Select a file open folder and new final mask and click add mask and page is updated
10 go setup > projector mask and again see old mask

I tried different options and updated and reboot pi
pi 1839 beta open only old mask,does not replace and does not insert new mask

I've done this many times and it all worked but it's half a day now does not work

what am I doing wrong?

Last edited by elshad66 (2018-06-27 19:58:46)

Shahin · 2018-06-30 02:56:30

Let me check, recently I have update mask module.
The stable version also have this issue?

elshad66 · 2018-06-30 10:33:03

HI Shahin

3 days ago updated to 1839 beta
But the next day it worked, I do not know why

there is still a problem, for example

1 if you set the color to 0,0,255, each point shines white
2 when the UV sensor has made a uniform mask
3 click Preview, exit mask with blue color
4 I again check mask the sensor, and is no longer uniform
5 if you save the mask then the final mask is black ,,,, should be blue

1 Is it possible that the dots were also with color?
2 is it possible that the final mask was color?
3 Decrease Mask Intensity ,, the button is removed in the new version,
Is it possible to add this button to the mask generator?

4 can be added a button to select a profile,?
where to add a working mask
because the white gray mask
and the mask + color uniformity sensor data varies
and change data Comma Separated Values

eg
created a mask + color 0,0,255 for epic resin and will save in the profile epic
created a mask without color for MCASTresin and save in the profile MCAST

elshad66 · 2018-06-30 16:31:23

today I found this
my pi is connected by wi fi 192.168.1.24 (static) to computer 192.168.1.25 (static)
and at the same time is connected to the network card to direct 192.168.137.11 ( no static)
from both windows all works
only from the window that is open by the address 192.168.137.11
The mask does not update and does not take from the folder
from window connected by wi fi all work
if you insert a new mask on the wi fi connected open another window (192.168.137.11) see the old mask
even if you refresh the page 100 times but the slicer on the new mask

Last edited by elshad66 (2018-06-30 16:39:03)

Shahin · 2018-07-03 05:22:12

Support for colors will cause performance downgrades as we are using some colors for processing images faster.

nanoDLP

#1 2018-06-27 19:43:58

it is not possible to insert a new mask

#2 2018-06-30 02:56:30

Re: it is not possible to insert a new mask

#3 2018-06-30 10:33:03

Re: it is not possible to insert a new mask

#4 2018-06-30 16:31:23

Re: it is not possible to insert a new mask

#5 2018-07-03 05:22:12

Re: it is not possible to insert a new mask

Board footer