You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2019-05-04 21:18:05
- Abaddon
- Member
- Registered: 2019-04-01
- Posts: 7
Some quality problem
Hi guys i have one problem with quality of object i print. They looks like some saw tooths and it is very regular effect, always the same numbers of "tooths" and the same place in every object i print. Changing curing time, microstepping, layer thickness, speed did not help and im out of ideas so i hope someone of you have any 
Offline
#2 2019-05-07 05:14:42
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 2,737
Re: Some quality problem
Is it effects all side of your print?
How many mm into print it happens?
Also try increase wait time.
Offline
#3 2019-05-07 12:47:56
- Abaddon
- Member
- Registered: 2019-04-01
- Posts: 7
Re: Some quality problem
Yest, it is on every side of my print.
What do you mean? Height and width of tooth?
I will try with increased time, thanks.
Offline
#4 2019-05-07 19:16:40
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 2,737
Re: Some quality problem
Also check your resin details maybe your are using that with less height than its optimized for.
Offline
#5 2019-05-19 18:21:23
- Abaddon
- Member
- Registered: 2019-04-01
- Posts: 7
Re: Some quality problem
Hi, it's me again. I did some tests, resin looks fine and bigger wait times did not help. Any other ideas ?
Offline
Pages: 1