You are not logged in.
Pages: 1
HI Shahin,
On this version i got some problems with WIFI from RPI3 disconnecting after a cold restart.
The router is correct,
and every time i have to reconnect via cable to restart the wifi.
Also,
when uploading some zip with all the pictures from a slice,
if i make any change in resin setup then i launch the recreate button. the machine lose all the pictures.
I have to delete and re import the zip file.
Thanks for your help.
Offline
I am having the same issue with wifi disconnecting after rebooting.
Clean install with PiBakery and wifi settings saved.
When NanoDLP was installed, configured, and rebooted, the pi disappeared from the wifi network and does not respond to pings. It is not showing up under a new address.
Offline
Are you sure IP does not change? Try windows upnp function maybe it changes each time you reboot your pi.
Offline
Confirmed. I'm viewing my entire network from my routers interface, and the Pi is not showing up on it. I had associated a name with the MAC address. I'll dig out an Ethernet cable when I get home from work this evening and see if I can SSH in that way.
Offline
Same for me, The ip of the raspi never change, and it is still written in the config. the only thing i find is the wifi act like a switch on or off.
if connected with cable, i can open the cloud and connect to the printer with ipv4 address. then i clic on wifi top right corner, then it became green and switch automatically to wifi.
Then the router and angry ip scanner can find it.
i replace my old backup 1555, and no problems.
i install 3 times from scratch 1777 with raspi update then nanodlp. problems.
thanks
Last edited by laopa (2018-01-16 14:05:52)
Offline
Pages: 1