You are not logged in.
Pages: 1
It would be great if I can just add a some solid rectangles to fix a bad model.
For example I have 4 layers that need adjustment but I will need to revisit the 3D model fix then upload back to nanodlp for slicing instead of drawing a couple shapes for 4 layers and calling it a day.
Thanks that worked. That makes sense since it has a memory limit of 1gb of ram. I will look into swap disk and see if I can offload it to a ssd or something..
but I am thinking it just the underpowered pi that cannot handle large files. I may look into the linux version on a proper machine.. otherwise I just need to slice on my desktop.
Printer Logs:
2017/03/24 05:17:16.508684 {"Layer":"99","module":"Hardware","level":"Notice","msg":"Initializing build # 1370 - muve3d"}
⇛ http server started on :80
2017/03/24 05:17:16.535507 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
2017/03/24 05:17:16.614983 {"Layer":"99","module":"WIFI","level":"Warning","msg":"WIFI interface wlan0 detected"}
2017/03/24 05:17:17.414256 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: start↵"}
2017/03/24 05:17:17.415483 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Marlin 1.0.0↵"}
2017/03/24 05:17:17.422377 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Last Updated: May 19 2016 11:14:58 | Author: (none, default config)↵"}
2017/03/24 05:17:17.423844 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: Compiled: May 19 2016↵"}
2017/03/24 05:17:17.428067 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Free Memory: 4983 PlannerBufferBytes: 1312↵"}
2017/03/24 05:17:17.430864 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Hardcoded Default Settings Loaded↵"}
2017/03/24 05:17:17.433709 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Steps per unit:↵"}
2017/03/24 05:17:17.436453 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M92 X36.36 Y36.36 Z400.00 E400.00↵"}
2017/03/24 05:17:17.439310 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum feedrates (mm/s):↵"}
2017/03/24 05:17:17.443547 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M203 X600.00 Y600.00 Z20.00 E20.00↵"}
2017/03/24 05:17:17.446269 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum Acceleration (mm/s2):↵"}
2017/03/24 05:17:17.449046 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M201 X4000 Y4000 Z4 E4↵"}
2017/03/24 05:17:17.453327 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Acceleration: S=acceleration, T=retract acceleration↵"}
2017/03/24 05:17:17.456162 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M204 S3000.00 T3000.00↵"}
2017/03/24 05:17:17.471641 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)↵"}
2017/03/24 05:17:17.475815 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M205 S0.00 T0.00 B20000 X40.00 Z0.40 E0.40↵"}
2017/03/24 05:17:17.478527 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Home offset (mm):↵"}
2017/03/24 05:17:17.481249 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M206 X0.00 Y0.00 Z0.00↵"}
2017/03/24 05:17:17.482707 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:PID settings:↵"}
2017/03/24 05:17:17.485561 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M301 P22.20 I1.08 D114.00↵"}
2017/03/24 05:23:39.498243 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:23:39.498699 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:23:44.498415 {"Layer":"99","module":"STL","level":"Notice","msg":"Start Reading STL File"}
2017/03/24 05:23:47.127902 {"Layer":"99","module":"Gcode","level":"Notice","msg":"Position set to 0"}
2017/03/24 05:23:48.733027 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:23:48.733276 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:17:16.667735 {"Layer":"99","module":"Hardware","level":"Notice","msg":"Initializing build # 1370 - muve3d"}
2017/03/24 05:17:16.692489 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
⇛ http server started on :80
2017/03/24 05:17:16.783384 {"Layer":"99","module":"WIFI","level":"Warning","msg":"WIFI interface wlan0 detected"}
2017/03/24 05:17:17.579244 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: start↵"}
2017/03/24 05:17:17.580491 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Marlin 1.0.0↵"}
2017/03/24 05:17:17.586233 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Last Updated: May 19 2016 11:14:58 | Author: (none, default config)↵"}
2017/03/24 05:17:17.589061 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: Compiled: May 19 2016↵"}
2017/03/24 05:17:17.593319 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Free Memory: 4983 PlannerBufferBytes: 1312↵"}
2017/03/24 05:17:17.596223 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Hardcoded Default Settings Loaded↵"}
2017/03/24 05:17:17.597642 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Steps per unit:↵"}
2017/03/24 05:17:17.601830 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M92 X36.36 Y36.36 Z400.00 E400.00↵"}
2017/03/24 05:17:17.604695 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum feedrates (mm/s):↵"}
2017/03/24 05:17:17.607773 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M203 X600.00 Y600.00 Z20.00 E20.00↵"}
2017/03/24 05:17:17.610497 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum Acceleration (mm/s2):↵"}
2017/03/24 05:17:17.613363 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M201 X4000 Y4000 Z4 E4↵"}
2017/03/24 05:17:17.617692 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Acceleration: S=acceleration, T=retract acceleration↵"}
2017/03/24 05:17:17.620514 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M204 S3000.00 T3000.00↵"}
2017/03/24 05:17:17.636483 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)↵"}
2017/03/24 05:17:17.640699 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M205 S0.00 T0.00 B20000 X40.00 Z0.40 E0.40↵"}
2017/03/24 05:17:17.643454 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Home offset (mm):↵"}
2017/03/24 05:17:17.644944 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M206 X0.00 Y0.00 Z0.00↵"}
2017/03/24 05:17:17.647779 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:PID settings:↵"}
2017/03/24 05:17:17.650618 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M301 P22.20 I1.08 D114.00↵"}
2017/03/24 05:45:05.602456 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:45:05.602643 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:45:10.602294 {"Layer":"99","module":"STL","level":"Notice","msg":"Start Reading STL File"}
2017/03/24 05:17:17.215679 {"Layer":"99","module":"Hardware","level":"Notice","msg":"Initializing build # 1370 - muve3d"}
⇛ http server started on :80
2017/03/24 05:17:17.243111 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
2017/03/24 05:17:17.322855 {"Layer":"99","module":"WIFI","level":"Warning","msg":"WIFI interface wlan0 detected"}
2017/03/24 05:17:18.122276 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: start↵"}
2017/03/24 05:17:18.123403 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Marlin 1.0.0↵"}
2017/03/24 05:17:18.129131 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Last Updated: May 19 2016 11:14:58 | Author: (none, default config)↵"}
2017/03/24 05:17:18.131779 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: Compiled: May 19 2016↵"}
2017/03/24 05:17:18.136073 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Free Memory: 4983 PlannerBufferBytes: 1312↵"}
2017/03/24 05:17:18.139078 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Hardcoded Default Settings Loaded↵"}
2017/03/24 05:17:18.140364 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Steps per unit:↵"}
2017/03/24 05:17:18.144723 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M92 X36.36 Y36.36 Z400.00 E400.00↵"}
2017/03/24 05:17:18.147542 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum feedrates (mm/s):↵"}
2017/03/24 05:17:18.150436 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M203 X600.00 Y600.00 Z20.00 E20.00↵"}
2017/03/24 05:17:18.153300 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum Acceleration (mm/s2):↵"}
2017/03/24 05:17:18.156109 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M201 X4000 Y4000 Z4 E4↵"}
2017/03/24 05:17:18.161770 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Acceleration: S=acceleration, T=retract acceleration↵"}
2017/03/24 05:17:18.164674 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M204 S3000.00 T3000.00↵"}
2017/03/24 05:17:18.179077 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)↵"}
2017/03/24 05:17:18.184724 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M205 S0.00 T0.00 B20000 X40.00 Z0.40 E0.40↵"}
2017/03/24 05:17:18.186120 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Home offset (mm):↵"}
2017/03/24 05:17:18.188929 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M206 X0.00 Y0.00 Z0.00↵"}
2017/03/24 05:17:18.190384 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:PID settings:↵"}
2017/03/24 05:17:18.193227 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M301 P22.20 I1.08 D114.00↵"}
2017/03/24 05:50:36.259499 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:50:36.260955 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017/03/24 05:50:41.251954 {"Layer":"99","module":"STL","level":"Notice","msg":"Start Reading STL File"}2017-03-24 05:17:17.216477 {"Layer":"99","module":"Hardware","level":"Notice","msg":"Initializing build # 1370 - muve3d"}
2017-03-24 05:17:17.243116 {"Layer":"99","module":"Shutter","level":"Debug","msg":"Shutter Close"}
2017-03-24 05:17:17.243195 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
2017-03-24 05:17:17.243256 {"Layer":"99","module":"Hardware","level":"Debug","msg":"Stepper motor enabled"}
2017-03-24 05:17:17.243687 {"Layer":"99","module":"Gcode","level":"Debug","msg":"Transfering Data M280 P2 S10↵"}
2017-03-24 05:17:17.32293 {"Layer":"99","module":"WIFI","level":"Warning","msg":"WIFI interface wlan0 detected"}
2017-03-24 05:17:17.323077 {"Layer":"99","module":"WiFi","level":"Debug","msg":"Status Monitoring"}
2017-03-24 05:17:18.122464 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: start↵"}
2017-03-24 05:17:18.123535 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Marlin 1.0.0↵"}
2017-03-24 05:17:18.129192 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Last Updated: May 19 2016 11:14:58 | Author: (none, default config)↵"}
2017-03-24 05:17:18.131837 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: Compiled: May 19 2016↵"}
2017-03-24 05:17:18.136124 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: Free Memory: 4983 PlannerBufferBytes: 1312↵"}
2017-03-24 05:17:18.139122 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Hardcoded Default Settings Loaded↵"}
2017-03-24 05:17:18.140406 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Steps per unit:↵"}
2017-03-24 05:17:18.144775 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M92 X36.36 Y36.36 Z400.00 E400.00↵"}
2017-03-24 05:17:18.147601 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum feedrates (mm/s):↵"}
2017-03-24 05:17:18.150489 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M203 X600.00 Y600.00 Z20.00 E20.00↵"}
2017-03-24 05:17:18.153344 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Maximum Acceleration (mm/s2):↵"}
2017-03-24 05:17:18.156162 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M201 X4000 Y4000 Z4 E4↵"}
2017-03-24 05:17:18.161813 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Acceleration: S=acceleration, T=retract acceleration↵"}
2017-03-24 05:17:18.164725 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M204 S3000.00 T3000.00↵"}
2017-03-24 05:17:18.179137 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)↵"}
2017-03-24 05:17:18.184777 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M205 S0.00 T0.00 B20000 X40.00 Z0.40 E0.40↵"}
2017-03-24 05:17:18.186163 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:Home offset (mm):↵"}
2017-03-24 05:17:18.188986 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M206 X0.00 Y0.00 Z0.00↵"}
2017-03-24 05:17:18.190426 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo:PID settings:↵"}
2017-03-24 05:17:18.193269 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: echo: M301 P22.20 I1.08 D114.00↵"}
2017-03-24 05:50:36.257726 {"Layer":"99","module":"Gcode","level":"Debug","msg":"Transfering Data G90↵G92 Z0↵"}
2017-03-24 05:50:36.259614 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017-03-24 05:50:36.265688 {"Layer":"99","module":"Terminal","level":"Notice","msg":"Received Data From RAMPS: ok↵"}
2017-03-24 05:50:41.252037 {"Layer":"99","module":"STL","level":"Notice","msg":"Start Reading STL File"}I uploaded a large 1.5gb stl to slice to see what happens. It crashed the pi. When I reboot I have access through web address for 30-40 secs of time then I lose connection again. I think it is low on memory or possibly disk space (8gb card with this STL and NanoDLP only)
I have access through SSH at anytime.. I tried sudo killall printer but it says no process found.
I do have time to delete the STL plate before I lose access but it does not delete it just wants to slice it no matter how many times I try to delete before losing access. I think my only option is to reinstall NanoDLP. I have had this problem with deleting large STL's before so it seems to happen time to time.
anyone else have this issue?
Edit:
Some Pi info while I have access:
Memory is fine:
pi@raspberrypi:~ $ free -h
total used free shared buffers cached
Mem: 862M 47M 814M 636K 4.0M 15M
-/+ buffers/cache: 28M 834M
Swap: 99M 9.6M 90MDisk Space is fine:
pi@raspberrypi:~ $ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 7.2G 1.8G 5.2G 26% /
devtmpfs 427M 0 427M 0% /dev
tmpfs 432M 0 432M 0% /dev/shm
tmpfs 432M 5.8M 426M 2% /run
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 432M 0 432M 0% /sys/fs/cgroup
/dev/mmcblk0p1 60M 20M 41M 34% /bootFigured it out. My Pulse width was off. I found a spec sheet online and it works fine now.
Servo Pulse Width - Open
2100
Servo Pulse Width - Close
900
Servo Signal Length
1500 (This one I guessed but it seems to work)
I bought a HS-5065MG servo motor to see if I could reduce audible noise and stutter when using the shutter on my projector. I cannot seem to get it to work. It moves once then stops working.
My previous Servo works fine: TowerPro's SG1050 although super loud and stutters..
The specs seem similar so I am unsure how to get it to work. I am powering it off a USB cable plugged into a powerbar. The Signal is running through Raspberry pi3
Running this on the mUVe3D Ultipro+
Using Gcodes from mUVe3D's settings:
Shutter open:
M280 P2 S160
Shutter closed:
M280 P2 S10
Servo Pulse Width Open
1400
Servo Pulse Width Close
700
Servo Signal Length
1000
Thanks I will ask in the Slic3r forum. I do not see any options for that. It would be great feature if NanoDLP had a "start at layer" feature.
Even some of my models that are a bit skewed at the base by a very small amount could benefit from starting at layer 1 or 2 then layer 0...
Hi Shahin,
I am using Slic3r to generate the SVG but Slic3r appears to use the model's lowest zero point instead of the stl's zero. So I am uploading a SVG to NanoDLP.
I am not sure if nanoDLP slices the models at 0 point or if it uses the lowest point as zero. I haven't tried it since the model I am using has a high poly count.
I can PM you the model or svg.
Same as the title. Anyway of doing this? Does the resume function just resume a print but not start a print at that level allowing for burn in time?
I am finding half my prints are messed at the first level since I use b9creators software to generate supports. Sometimes the supports poke through the bottom and I don't notice causing the print to have the first few layers blank..
Bonus question. Is there a way to edit the svg after it's sliced to remove the first couple layers or edit? I noticed in adobe illustrator it comes in as layers. Can I just delete layers and resave and it will work or do I need to rename the layers? I suppose I should experiment.
Thanks I will try it next time. I couldn't figure it out in time so I just recalibrated. Someone else suggested turning off the arduino send the tilt command turn back on the arduino and send return from tilt.. a bit of a workaround but sounds like it might work to.
My Arduino reset just after the tilt command so it is stuck in that position. Anyway of returning from tilt? The command doesn't work I presume it needs to have the Resin Drain command first to allow it to return. Anyway of fixing this without manually putting the plate back in the correct position and recalibrating.
~ mUVe3D UltiPro+
It appears to be working now. I think I pushed update after everything failed so it was a bit buggy. Seems fine now with the latest version. Is there a updated change log somewhere?
I am not sure what happened since I am new but my print seemed like it was working but as soon as it hit 112 layer it stalled and opened the shutter to 16x9 image and just stayed projected. I couldnt stop the print either. It still wont let me stop it or move z axis, shutter after rebooting. I deleted the plate and nothing seems to work. I will need to reinstall it seems.
I am using:
Nano DLP Build 1149
muVE3d via raspberry pi and arduino
Pages: 1