You are not logged in.
HI Shahin
I change the output of on a video driver ,on a computer that gave a black screen after the start (WIN XP32)
The first put the projector, the second monitor, and the monitor set the main
collected all the versions that I found on a computer and on a flash drive ,and one by one checked everything
those old versions that do NOT decrease on the first page, (where the log),,connection to the projector
If the click is start, the cursor appears in the center of the projector , and can be moved to the monitor, and all the calibration grids work,
and write "Initializing build # 0 - generic"
but other new versions that ,reduce, they do not work correctly,, after click start, the cursor disappears,and need to press the WIN on the keyboard
and all versions are written 1635,1647, 1686 ,1695 ,1739 1744,,while printing is not yet check ,,tomorrow I will check all versions on another computer
Thank you
https://3dprinterwiki.info/wiki/wanhao- … or-d7-sla/
there is a lot of information
HI Shahin
I have two printers with a ACERs of 1500 and 6510, with two absolutely identical PCs
they were never connected to the Internet, one WIN 7 64, another XP 32
older versions worked on them.all versions I threw a flash drive
I wanted to connect a pi and update it via the Internet, and all the win versions crashed,
WIN 7 64
old version writes "Initializing build # 0 - generic"
if click start display.,cursor disappears
if click LBM.,projector shines white
if click the button WIN on the keyboard ,and move the mouse to the monitor ,The cursor appears,
and through the projector calibration all works, but after 2-3 minutes again the projector is white
on the bottom panel writes nano dlp image viewer no answer
everything is exactly as happens on a laptop WIN 8 64
WIN XP 32
if click start display,monitor black
if click the button WIN on the keyboard ,and move the mouse to the monitor
open only the start menu and the bottom panel, and the cursor is visible only on the bottom panel, and can only close,nanodlp.exe
on the bottom panel writes nano dlp image viewer no answer
Also does not work the new version 1744 on all PCs
before connecting to the Internet and updating everything was working fine
with CW all works.with pi all works but pi very slow,need a working win version
I will be very grateful how to solve this problem
Shain thank for the Color h added of the mask
i I'm using UVM-30A but the sensor itself from soldering and connected directly to a micro voltmeter
and make a uniform mask through the pi generator relative to the minimum value of the sensor 7.2
if use a mask and color in the profile, the value of the sensor decreases 4.2
if Mask Preview save and import normally 7-7,2 but the Mask Preview is not smoothed
can make the final mask with color?
can also add color a Windows version?
so that it was more understandable problem behold screen
[img = 2.png] http://www.nanodlp.com/forum/uploads/52 … bf8265.png [/ img]
Shain thank for the excellent generator of the mask
But if you add a color, can adjust it together
It was very good, because I'm in CW, I put color 405nm RGB 73,0,188 and mask
1,,,For example, I adjusted the mask to the points, then brought it to the screen
A non-smoothed mask is displayed,
With square boundaries, which makes verification difficult
This mask is that in the middle,
As output to the screen, the smoothed mask, which is on the right?
2,,,If the mask is ready and saved
How to output it again to the mask generator,To edit
Do not start every time from the beginning
