You are not logged in.
Pages: 1
اhi dear shahin
Proposed the addition of several key menu and dedicated to their PINs
1. switch furnaces ultraviolet (cure after printing) with Time Rate
2 - key to set the resolution of the video projector 30, 50 and 80 microns with electric-driven rather than manual adjustments accordingly.
3 - key for auto-washing with alcohol
Imagine all these features in one device
Thanks
Offline
2 - key to set the resolution of the video projector 30, 50 and 80 microns with electric-driven rather than manual adjustments accordingly.
I think it is hard to make electric driven adjustment if you want to obtain good dimensional tolerances. When you change the distance between the VAT and projector you need to manually focus. In my experiences you need to recalibrate 3d printer when you tinker with focus. Your opinion?
Offline
You can already handle those with help of custom buttons and GPIOHigh / GPIOLow keywords.
Offline
Pages: 1