You are not logged in.
Pages: 1
Hi
Can I view live video on nanodlp webpage When printing?
Last edited by raranjbar (2017-11-22 15:22:48)
Offline
I agree, I would be interested, too, or at least have a way to show the last photo. When I hit "Take a photo", it makes an attempt to show "printing view" but then go back to normal dashboard with no photo shown.
Offline
It will put pressure on pi hardware. You can take video beside nanodlp, to see if it is reliable or not. (It was not reliable couple of years ago)
Offline
I guess it was the main limitation, even though I was running some printer proprietary UI on the same RPi2 and it had live video option with no problem.
By the way, how about visualizing last photo at least?
Offline
It already display last layer. If you have issue with that let me know.
Offline
It already display last layer. If you have issue with that let me know.
I mean it works while printing, but when idle Dashboard never shows anything, neither if I press "Take a photo". To make it work while printing I had to add "-o cam.jpg" option in the camera command box; might this influence behaviour? should I choose a different path?
Offline
Pages: 1