You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2017-08-15 15:05:09
- Yianni-VJ
- Member
- Registered: 2016-05-24
- Posts: 59
Crashing while Slicing
While slicing this file on the Pi, system halts and I lose connectivity.
I tried to do the same in windows version, nanoDLP crashes as well.
Can anybody suggest what could be the issue?
Here is the file:
https://drive.google.com/a/virtual-jewe … sp=sharing
Last edited by Yianni-VJ (2017-08-15 15:13:46)
Offline
#2 2017-08-15 17:47:31
- Yianni-VJ
- Member
- Registered: 2016-05-24
- Posts: 59
Re: Crashing while Slicing
For whoever like to reproduce this error, I forgot to mention I sliced at 25 microns.
Offline
#3 2017-08-15 19:42:13
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 1,834
Re: Crashing while Slicing
It requires permission to download the file.
Do you see any message after crash? On rpi or win.
Offline
#4 2017-08-15 19:58:42
- Yianni-VJ
- Member
- Registered: 2016-05-24
- Posts: 59
Re: Crashing while Slicing
Here is a dropbox link:
https://www.dropbox.com/s/35hvt1w2zg4az … 5.stl?dl=0
There are no msgs before crashing, it seems like slicing is completed and nanodlp.exe shuts down abruptly.
Offline
#5 2017-08-16 21:45:05
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 1,834
Re: Crashing while Slicing
I could not crash nanodlp on 25microns. Could you share debug file, I will use same profile as yours to see if I could crash it or not.
Offline
#6 2017-08-17 07:09:50
- Yianni-VJ
- Member
- Registered: 2016-05-24
- Posts: 59
Re: Crashing while Slicing
This file has my logs after a crash and a different STL file which I have just tested to crash.
After rebooting the Pi I had to delete the erroneous plate to avoid the loop.
https://www.dropbox.com/s/yfkoaktavragu … g.zip?dl=0
Offline
Pages: 1