nanoDLP

Latest version...this is a model I have done previously but this plate has multiple copies....I have also changed profiles in that I turned on dimming this time to see if it could
prevent some parts of the model from over curing....Error seems happen just as the dimming process starts so I will try turning it off.

2017/06/17 17:57:12.982762 {"Layer":"1","module":"STL","level":"Notice","msg":"Extracting Layer 101 - Z Level -13.48915"}
panic: runtime error: integer divide by zero

goroutine 365 [running]:
projects/printer/app/renderer/dimming.DimmablePos(0x5a0, 0xa00, 0x1, 0x0, 0x1a4241d7, 0x14ec4000, 0xe10000, 0xe10000, 0x1, 0x443fb63a, ...)
    /home/pi/go/src/projects/printer/app/renderer/dimming/dimming.go:52 +0x2f8
projects/printer/app/renderer/dimming.Dimming(0x5a0, 0xa00, 0x65, 0x1, 0x64, 0xffffb201, 0x6996ff, 0x14ec4000, 0xe10000, 0xe10000)
    /home/pi/go/src/projects/printer/app/renderer/dimming/dimming.go:12 +0x11c
projects/printer/app/renderer.(*LayerDrawer).Render(0x10a33f00, 0x65, 0x1615ce00, 0x18, 0x0, 0x0, 0x0, 0x0, 0x5a0, 0xa00, ...)
    /home/pi/go/src/projects/printer/app/renderer/render.go:132 +0x43c
projects/printer/app/format/stl.(*STL).renderLayer(0x10b48240, 0x1615ce00, 0x18, 0x65, 0xc157d38f, 0x15f8a000)
    /home/pi/go/src/projects/printer/app/format/stl/stl.go:364 +0x6ec
projects/printer/app/format/stl.(*STL).renderLayers.func1(0x10b48240, 0x1615ce00, 0x18, 0x65, 0xc157d38f, 0x15f8a000)
    /home/pi/go/src/projects/printer/app/format/stl/stl.go:813 +0x44
created by projects/printer/app/format/stl.(*STL).renderLayers
    /home/pi/go/src/projects/printer/app/format/stl/stl.go:815 +0x1e8
pi@D7nanoDLP:~/printer $