You are not logged in.
Latest beta but still not working reading Lamp Hours
https://cl.ly/2q1K0m2B2T1l
Offline
Read Lamp usuage
hour 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 0x63
Replace to this command in the Setup page.
https://cl.ly/0b1a322c1Z1l
Did you change format of commands from /07 to 0x07 ?
Offline
Offline
No change on format.
The way you entered hex code is wrong. Also please, share debug file after pressing hour read. The shared debug file does not contain any log data on lamp hour.
Offline
Offline
Use \x07\x14\x00\x05\x00\x34\x00\x00\x15\x01\x63 instead of 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 0x63
Offline
Offline
Decrease projector connection speed to 9600 and try again.
Offline
https://cl.ly/3m0W2f3K2b16
https://cl.ly/2h170Z0J2U16
Unfortunatelly doesn`t work with 9600 also.
Offline
https://cl.ly/3V3k062M2338
420 Hour in the projectors menu
Offline
Sorry, put value in wrong field.
https://cl.ly/1r2w102L3R1l
https://cl.ly/1Z3b2Z3o3D2U - debug file
Offline
Projector doesn`t operate on baudrate different from 115200
https://www.manualslib.com/manual/11364 … =71#manual
Offline
Latest beta.
Reading Lamp Hours still 0.0000
https://cl.ly/2g1I290Y3G3r
Offline