You are not logged in.
Pages: 1
Hi,
I'm using raspberry Pi with nanoDlp and I have to search every time I turn on the raspberry Pi wich IP adress is working on.
How I can do it to fix this IP?
Thank you.
Offline
I have in the router indicated that it always gives the Rpi the same IP address via dhcp
Last edited by Xmike (2016-10-19 18:36:56)
Offline
I sitill does not know how to fix my IP.
Can you explain me a litlle more about this process to fix the IP?
Thank you
Offline
As Mike mentioned you can change DHCP/NAT settings on your modem to reserve IP for your rpi. But it depends on your router type.
Another way is to edit /etc/network/interfaces file and make rpi IP static. There is numerous guide on how IP should be made static on linux terminal.
Offline
I want to do it on linux terminal, but how I can connect to the rpi terminal where I have nanodlp installed?
Offline
If you are windows user, try putty to connect to raspberry pi.
Offline
Hi Shahin,
I am still trying to fix my IP.
I have my Raspberry PI with nanodlp installed. What I have to connect and where to be able to connect to the terminal of my raspberry pi ? Because when I connect my raspberry pi to a LCD Display I can see anything at all.
Thank you so much,
Offline
The display connected to raspberry will be used for layer projection so you could not use it anymore.
Use tutorial below to connect to RPi
http://www.hobbytronics.co.uk/raspberry-pi-ssh
Offline
Thank you so much Shahin!!
All clear now
Offline
Pages: 1