Rebuild plate after dimming changes?

jaidek · 2017-05-24 22:31:57

Quick question, do we have to rebuild the plate if changes are made to the dimming amount and wall thickness?

Also, would it be possible in a future release to add global dimming to the printing profile? That way we could adjust the brightness of a plate on a per resin basis without having to adjust the projector.

Thanks!

Shahin · 2017-05-25 04:34:09

Any change related to slicer need rebuild.

We have too many override options on profile / machine levels. It becomes very confusing for new users.

jaidek · 2017-05-25 12:58:07

Hey Shahin,

Thanks for the reply on the dimming. I'll give that a go!

Is there currently an override that would do something similar? Just not a per profile basis?

Thanks!

jaidek · 2017-05-26 18:25:04

Ah, got it. I totally forgot about the color parameter inside of the printer profiles. I can use that to globally dim if needed.

Thanks!

nanoDLP

#1 2017-05-24 22:31:57

Rebuild plate after dimming changes?

#2 2017-05-25 04:34:09

Re: Rebuild plate after dimming changes?

#3 2017-05-25 12:58:07

Re: Rebuild plate after dimming changes?

#4 2017-05-26 18:25:04

Re: Rebuild plate after dimming changes?

Board footer