Errors under Windows

Pyper · 2017-06-10 22:20:09

I figured I would start a new topic.

I have a Windows Ultrabook, Arduino Mega w/ Ramps 1.4, and an Openbuilds Nema 17 linear actuator.

There is only one account on the machine and it is admin.

When I start nanodlp.exe with admin rights, http://127.0.0.1:8080 never connects.
Here is the command prompt I get with nanodlp.exe with admin rights:

When I start nanodlp.exe normally, I can access through http://127.0.0.1:8080
Here is the command prompt I get with nanodlp.exe normally:

Once it is started, I immediately get the error "Could Not Write to Status JSON File public/status.json open public/status.json: Access is denied."

I go to setup, set COM3 and adjust the screw mm to 8mm.

Then I go to z calibration and click a number, and it moves! yay!

If I click another number, it does not move. I get the error "Serial port could not be activated Access is denied."

Here is a link to my debug file.

?

Last edited by Pyper (2017-06-10 22:28:06)

Shahin · 2017-06-10 22:29:50

It is mix of permission and path issue.
Open command line and go to nanodlp folder. Run the program from command line and let me know if it fixed the issue.

Pyper · 2017-06-11 00:13:54

THANK YOU!
I have been running it from windows explorer.
I started an elevated/admin command prompt and ran it from command line, now everything works!
No errors! Thank you

Jimustanguitar · 2017-08-03 00:48:35

I'm seeing the same behavior, but launching the file as admin from a command prompt didn't seem to solve it. (moved folder to root of C, launched cmd as admin, etc).
The command prompt looks good, but I can't hit it on a browser.

http://imgur.com/jErGLs2

In chrome, I get a simple page not found error. In edge, I get the following:

.NETSystem.Runtime.Remoting.RemotingException: Tcp channel protocol violation: expecting preamble. at System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadAndMatchPreamble() at System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadVersionAndOperation(UInt16& operation) at System.Runtime.Remoting.Channels.Tcp.TcpServerSocketHandler.ReadHeaders() at System.Runtime.Remoting.Channels.Tcp.TcpServerTransportSink.ServiceRequest(Object state) at System.Runtime.Remoting.Channels.SocketHandler.ProcessRequestNow()

Any idea what might be wrong?

Shahin · 2017-08-03 06:23:08

Make sure no other application using same port as nanodlp. On windows default port is 8080 you can edit address by opening db/machine.json
Another reason for failure could be aggressive firewall or antivirus which does not let nanodlp listen on a port.

nanoDLP

#1 2017-06-10 22:20:09

Errors under Windows

#2 2017-06-10 22:29:50

Re: Errors under Windows

#3 2017-06-11 00:13:54

Re: Errors under Windows

#4 2017-08-03 00:48:35

Re: Errors under Windows

#5 2017-08-03 06:23:08

Re: Errors under Windows

Board footer