nanoDLP

Good suggestions, thank you

What about having a transparent plane attached to mouse. Which one do you prefer more and why?

I think it can be transparent , but better if it is not link to mouse ,
and have exactly move up / down same real print layers , the mouse during install support moving a lot around island ( sample pave prongs )
and dynamic  plane can make lost attention , but if it step static movement , you can control more simple / precise control  spaces between neighbor supports.
because   can see all islands .
better link it to the keyboard button up / down arrow
or any shortcut button .
one press one layer thickness

Last edited by DLprinter (2017-01-14 16:24:07)

Shahin ,

Great step forward !

but I think better install support when look to model from floor view ,
now in this case cannot see cutting plane.

better if you invert default view , from top view

to bottom view .

3) add small icon to the stored preset.

I mark it in last picture

and do not use   angular limit movement of camera .

there is two benefit of using ball in the end :
first is more delicate attach to surface compare with other ,
second is less chance to destroy surface when removing support

Last edited by DLprinter (2017-01-28 14:31:06)

looking forward  :-)
thanks to you
regards !

Did something change between 1332 and release 1337? I was able to play with the add support options and get it to work but now I cannot add support no matter what i try. Nothing gets added where I click. I have tried safari and chrome.

I just updated to 1338 and still has the same issue. I will try chrome and see if that works.

That fixed it. Thank you for the quick fix.

Thank you so much for the Plate feature. This is what I have been waiting for. Still needs a little work and some day auto arrange, but it is a great start. Don't know how easy it would be to select multiple files on the Plate View to import instead of one at a time then place them so they are not touching each other?

Great suggestions, thank you.

About keeping piece on viewport when user back to Layout View, issue is the placed supports must be removed.

So when user back to layout view. We can do couple of things
1. Do not display piece at all (current one)
2. Display but remove supports (I would hate to lose what I already have it there)
3. Display with support user should remove support manually.
4. Do not display piece at all but user could reload model without support of clicks on right side. (no sure I think it will pretty complex to grasp).