How can I reset the Perfex KT-19 transmitter?

This entry was posted in All Categories Troubleshooting on by

If something is wrong with the steering or throttle control of your MINI-Z Sports or MINI-Z Moto Racer and it does not go away by resetting the chassis, please try resetting the Perfex KT-19 transmitter following these steps:

  1. Turn off the transmitter if it is on.
  2. Make sure that the steering trim knob is at the center.
  3. Turn the ST.D/R knob all the to the left.
  4. Position of LIGHT knob does not matter.
  5. Turn the steering wheel all the way to the right and push the throttle to the full-brake position and hold them.
  6. Turn on the transmitter. The LED should flash rapidly; this means you are now in the factory mode.
  7. Release the steering wheel and throttle lever.
  8. Turn the steering wheel fully to the left, right, left and right, and then release it.
  9. Pull/push the throttle lever to full-throttle, full-brake, full-throttle, and full-brake, and then release it.
  10. Turn the ST.D/R knob to the right most position. The LED should become solid.
  11. Turn off the transmitter and turn it on again. You are done.