Separate names with a comma.
Signup today and join in on the fun!
What will be easier, and less expensive, to replace? The delrin wheels or the V-rail? Also, if you use the solid wheels, rather than the slotted...
And the number is...? I want to see if they stock it at the Center Point Mall location!
That's the best I've seen in a long while. Can I quote it, PLEASE. [img]
@Robert Hummel, are you cutting all these parts with a outrunner as a spindle?
@Woodie49, put links I'm too lazy to copy and paste the numbers. :ROFL::ROFL::ROFL: 6.5A is kind of small. Is a 15A power supply that much more...
That's the one I was talking about but mine is only 10x10. It's tight but it works. Maybe 10x15 would have been a bit better. I'm sure that for most...
@Woodie49, if you are looking for one for the stepper then eBay is your friend. I got three from there. Depending on the amps you want they go...
@bhalkett & @Robert Hummel, are you asking what to use or how to install it? As for the 'what' I used a cable carrier that I purchase on eBay. It...
I use it with no problem and heard the same from others
That is so cool. :thumbsup:
Just screw it down with a few screws. :D
@Travis, that table looks good! I would add casters to it for just in case it has to be moved some times.:) I do it on all my machines, by the way.:D
1) Yes it can do it! 2) The accuracy depends on how well, or not well, you are calibrating the machine. So it's totally up to you. 3) Definitely...
Hear, Hear!!!
@Gvardo, I have my setup exactly the other way. I have the 24v for the stepper and 12v for the outrunner. Plenty of power from the outrunner at 12v,...
I would run the fan at max speed all the time. I can't see why you would want to reduce it, unless the noise is an issue but than the noise from the...
@Gvardo, is Robert correct in his assumption that you are going to use the power supplies for both the stepper motors and the spindle? If so I would...
@Ceiling Cat, I don't know what you mean with 'host computer'. Is it a dedicated computer for the machine? That's what I did. I bought on Ebay an old...
A variable speed router is the way most go. That way you can change your speed to suit your material and bit size. For balsa use a 1/6" bit. That's...
That motor will work fine, Gvardo. I have a very similar motor on my machine. The power supplies are a great price. I paid for one about the same as...
