Separate names with a comma.
Signup today and join in on the fun!
I like the way your steppers are connected to the hub, Dan. Looks really clean. If you cut new plates with your router, maybe add two holes in the x...
Every system is only as strong as it's weakest link and the weakest link is where the belts are separated and one belt goes over the driving pinion....
I think it's a better idea to keep the two motors on the y axis, unless you go with a motor in the middle. With only one motor on a side rail you...
I guess I'll have to google 'rotocasting' to know what it's all about. lol
Yes
Mark, in a poll I'll vote for the rollers. The option to have foam in any length is what attracted me to the PhlatPrinter in the first place. I also...
Just had a look at it. It got lots of bad reviews. The paid version will cost $14 and is still not ready for beta, as per some of the reviews. As one...
Flo, I never cut on my machine anything but foam at a speed of 2000mm/min, using a 0.8 to 1mm bits. Unless I make the cut-depth 0.5mm or less my bits...
I use my drill-press all the time even though I have a CNC machine. Many times I drill parts that have been cut on the CNC machine but I also drill...
I change most of my setscrews to socket screws. A socket screw of the same diameter as the setscrew uses a much bigger Allen key and is much easier...
I already said in the past that in my opinion it sometimes doesn't make economic sense to make things yourself. I can't make this controller cheaper...
Do you have a bit that is 180mm long? The longest bit I can get is one with about 30mm effective cutting length. Unless, of course, all you want to...
The only one I know of is the Linux cnc program. If you have a dedicated computer for the machine it may be worth it to run it on Linux.
As you can see in the pic I attached it on each end. The rest has to be free so it can fold.
'Pushing' the machine can have quite a few results. The bit can break, you can miss steps, cuts will be imprecise (especially when changing...
Is it, as in the case of acrylic, better to use CO2 because it's hotter that the blue led?
Are you talking about something like this?...
Plenty of power to do most work. If you have a doubt, just start with a shallow and slow cut and then increase your speed (IPM) and/or depth of the...
@GrandpawB, I knew it was the port settings I just forgot that I knew! :ROFL: To tune your machine go to youtube and look for videos. You have to...
That is correct if you are emailing but if you are in a forum it's always that the newest posting is last. In all the forums that I've been on!
