OSH Park
Profile for peabody124
Shared projects
TL-ESC v0.4
by
peabody124.
4
layer board of
1.49x0.88
inches
(37.80x22.30
mm).
Shared on
April 2nd, 2015 12:01.
Tau Labs STM32F1 based ESC with PWM and CAN input support. Current monitoring and closed loop control modes. A-team theme song on startup.
Old writeup on the boards here
I need to clean up the code and publish that and will update here when I do.
Find the schematics and assembly information on github
TauLink v0.2
by
peabody124.
2
layer board of
0.86x1.25
inches
(21.95x31.75
mm).
Shared on
February 4th, 2015 17:45.
An STM32F1 and RFM22b based radio link that is compatible with Sparky2, Freedom and RevoMini as well as for TauLink to TauLink. Code support added to TauLabs here. For a a writeup on the hardware see my blog post here.
Can be used for both telemetry to the flight controller and as a PPM stream relay.
Inspired by (and code compatible with) the PipXtreme modem designed by Pip.
kisspdb v0.2
by
peabody124.
2
layer board of
1.18x1.13
inches
(30.00x28.58
mm).
Shared on
February 1st, 2015 15:23.
Power distribution board for KISS ESCs I designed and used in my Seeing Spark frame. This has voltage and current monitoring built in, as well as a 5V switching BEC.
Note: you should cut the enable pin off the switching regulator. It is not tolerant of high voltages
The switching regulator is a TPS560200 and the current monitor is a ZXCT1009.
You can find more information like schematic and assembly guide here and on the wiki