OSH Park
Shared projects
Teensy 3.2 Breakout Board R3
by
CPT.
2
layer board of
2.39x0.69
inches
(60.81x17.63
mm).
Shared on
September 19th, 2015 04:05.
NOT TESTED
Breadboard compatible breakout board for Teensy 3.2 from pjrc.
CUT TEENSY 3.2 VIN-VUSB PAD!
Parts list
- male pin header with long pins
- 5.84mm pin length on both sides, total height 14.14mm: Sullins PREC040SABN-RC (Digi-Key: S1022EC-40-ND)
- ~6.2mm pin length on both sides, total height 15mm: Aliexpress
- head: 5.97mm / tail: 5.33mm: 3M 929834-02-36-RK (Digi-Key: 929834E-02-36-ND, Mouser: 517-929834-02-36-RK)
- optional: Tactile switch for reset
- Surface Mount: ALPS SKQGADE010 (Mouser: 688-SKQGAD)
- Through Hole 6x6x5MM: ALPS SKHHAMA010 (Mouser: 688-SKHHAM)
- optional: VUSB to VIN diode
- Schottky diode SOD-123: Diodes Incorporated B130LAW-7-F (Mouser: 621-B130LAW-F)
- optional: RTC Crystal
- 32.768 kHz 12.5 pF: Citizen Finetech Miyota CFS206-32.768KDZF-UB (Mouser: 695-CFS206-327KF-U)
- (+ Teensy 3.2)
Pinmap & Dimensions
Older revisions
- Teensy 3.1: Breakout Board R2
- Teensy 3.1: Breakout Board R1
HC-SR04 board
by
overkiller.
2
layer board of
0.84x1.00
inches
(21.26x25.40
mm).
Shared on
September 18th, 2015 23:59.
light sensor
by
asirken.
2
layer board of
0.40x0.55
inches
(10.16x13.97
mm).
Shared on
September 18th, 2015 20:22.
Charging Board
by
asirken.
2
layer board of
1.97x1.58
inches
(50.01x40.00
mm).
Shared on
September 18th, 2015 20:22.
UniSolder 5.2
by
Finally.
2
layer board of
5.68x3.41
inches
(144.14x86.72
mm).
Shared on
September 18th, 2015 14:47.
Made possible by sparkybg. I’m sharing it.
This gerber files contain 3 PCBs (for front, back and OLED panel), to be printed on a single sheet. You can find the separate gerber files on Dangerous Prototypes website (link below).
For BOM, software, firmwire and other updates, see http://dangerousprototypes.com/forum/viewtopic.php?f=56&t=7218